|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Easy to access. Clear instructions. No problems. Printed fine.
 ;
Great scan but please note that it is entirely in GERMAN.
;
High quality scan of the manual, very quick and easy download and very important, a truly honest price. thanks
;
Minden rendben, de két megjegyzés, az ábrák nehezen kivehetők és a fizetés után 24 órát kell várni a letöltésre.
;
Manual correct, and complete. Downloads cleanly. Format of manual was presumably difficult to PDF to A4, but works reasonably well.
Recording
4. Select Date with the G button and set a Day/Month with the D / E button. If the date is September 23, the Timer programme mode appears as shown below.
Timer�programme 10:10�MON
VPS PR�Date��Start�Stop PDC 10�23®09�__:__�__:__�_ _ __�__®__�__:__�__:__�_ _ __�__®__�__:__�__:__�_ _ __�__®__�__:__�__:__�_ _ __�__®__�__:__�__:__�_ _
� Use:����OK���End:
Each time you press the D button, the date changes as shown below. 24/09 25/09 ... 30/09 01/10 02/10 ... 23/10 Each time you press the E button, the date changes as shown below. Every Day SUN MON ... SAT MON-SAT
SAT-SUN MON-FRI
TV/AV
5. Select Start with the G button.
Timer�programme 10:10�MON
CLEAR/RESET TIMER PROG
�
PR�Date��Start�Stop VPS PDC 10�25®09�10:10�11:10�OK __�__®__�__:__�__:__�_ _ __�__®__�__:__�__:__�_ _ __�__®__�__:__�__:__�_ _ __�__®__�__:__�__:__�_ _ Use:����OK���End:
PR
VOL
OK
VOL
PR
And set the start Hour : Minute with the D / E or F / G button. 6. Select Stop with the G button and set stop Hour : Minute with the D / E or F / G button. 7. Select VPS PDC with the G button and set OK with the D / E button. Option : In some models which have the SP/LP function, after setting the stop Hour : Minute, select the tape speed position with the G button and select the recording tape speed SP or LP with the SP/LP or D / E button. 8. Press the OK button. 9. Press the TIMER PROG button to return to normal TV viewing. After you finish programming, insert a tape with a safety tab. The TIMER REC indicator will illuminate. Note : a. Option : In some models, when the timer programmed TV programme with Auto AV On starts recording, the set will automatically switch to the recording programme, even during viewing. You can select another programme with the D / E or NUMBER buttons. b. During recording with Auto AV On, you cannot select AV2 with the TV/AV button, and do not switch on an external equipment connected to Euro Scart. If an AV signal is input, the set will automatically record an AV signal. c. If you want to cancel a timer programme, select the recording item with the D / E button, press the F / G button and then press the CLEAR/RESET button. d. If you press the OK button after pressing an incorrect digit accidently or setting the start and stop time that have already past, the recording will automatically be erased. e. If the clock has not yet been set, when you try to set timer programme the MENU 4 will appear. Set the time and date before proceeding. f. You can only display the Timer programme menu during a timer programme recording. g. To stop the manual recording, instant timer recording or timer programme recording, press the STOP/ button.
STOP
SP/LP
21
|
|
|
> |
|
